Connections - Panasonic Viera TH-L50DT60A Operating Instructions Manual

Connections

External equipment and cables shown are not supplied with this TV.
Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Check the type of terminals and cable plugs are correct when connecting.
Always use a fully wired HDMI cable.
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
Also read the manual of the equipment being connected.
Terminals
7 6
Basic connections
Mains lead and aerial
Mains lead
(supplied)
AC 220-240 V
50 / 60 Hz
Keep RF (aerial) cable away from the mains lead to avoid and minimise mains interference pickup.
Do not place the RF cable under the TV.
An aerial, correct cable (75
sound.
If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial
socket and the TV.
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your
particular area and the accessories required.
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the customer.
8
1
5
Digital TV, Analogue TV
Mains lead
Insert the mains plug firmly into place.
When disconnecting the mains lead, be absolutely sure to
disconnect the mains plug at the socket outlet first.
coaxial) and correct terminating plug are required to obtain optimum quality picture and
1
2
3
4
2
5
6
7
* The positions of each terminal and
built-in wireless LAN for WT60 series
and DT60 series are the same.
3
4
RF cable
SD Card slot
USB 1 - 3 port
HDMI1 - 3 (p. 9, 10)
DIGITAL AUDIO OUT
AV (COMPONENT / VIDEO)
(p. 10)
Aerial terminal
(see below)
ETHERNET (p. 9)
Aerial