Toshiba e-Studio 232 Operator's Manual page 29

Bluetooth Module (GN-2010)
This module enables the Bluetooth printing.
• Installed inside of the equipment
• The Antenna (GN-3010) is necessary.
Antenna (GN-3010)
This is used when the Wireless LAN module and Bluetooth Module are installed.
Printer Kit (GM-1070)
This kit enables the printing function.
• This kit is for the e-STUDIO232/282. Use the GM-1071 for the e-STUDIO233/283.
• Printing using a printer driver supporting XPS is not available.
Printer Kit (GM-1071)
This kit enables the printing function.
• Printing using a printer driver supporting XPS can be performed if the Memory (GC-1230) is installed in
the equipment.
Printer/Scanner Kit (GM-2070)
This kit enables the printing and scanning functions.
• This kit is for the e-STUDIO232/282. Use the GM-2071 for the e-STUDIO233/283.
• Printing using a printer driver supporting XPS is not available.
Printer/Scanner Kit (GM-2071)
This kit enables the printing and scanning functions.
• Printing using a printer driver supporting XPS can be performed if the Memory (GC-1230) is installed in
the equipment.
Scanner Kit (GM-4070)
This kit enables the scanning function.
Memory (GC-1230)
Printing using a printer driver supporting XPS can be performed if this memory is installed together with
the Printer Kit (GM-1071) or Printer/Scanner Kit (GM-2071).
e-BRIDGE ID Gate (KP-2004, KP-2005)
Users can login and use the equipment simply by holding their IC card over the e-BRIDGE ID Gate.
• This cannot be installed with the Work Table at the same time.
1
27