Specifications - Panasonic DMR-BWT800 Operating Instructions Manual

Specifications

Specifications are subject to change without notice.
∫ General
Dimensions (WkHkD):
[BWT800] 430 mmk66 mmk238 mm
[BWT700] 430 mmk59 mmk238 mm
[BWT800] 430 mmk66 mmk249 mm
[BWT700] 430 mmk59 mmk249 mm
Mass:
Power supply:
Power consumption:
"Power Save in Standby" is activated and "RF OUT
( Aerial Signal )" is set to "Off"
"Power Save in Standby" is not activated
Operating temperature:
Operating humidity range:
∫ TV system
Tuner System:
Channel Coverage:
VHF:
UHF:
RF converter output:
∫ Video
Video system: PAL (colour signal, 625 lines, 50 fields)/
NTSC (colour signal, 525 lines, 60 fields)
Recording system:
Video in (PAL/NTSC):
1 Video input (pin jack) 1 Vp-p 75 ≠, termination
S-Video in (PAL/NTSC):
1 S-Video input (S terminal) 1 Vp-p 75 ≠, termination
Video out (PAL/NTSC):
1 Video out (pin jack) 1 Vp-p 75 ≠, termination
S-Video out (PAL/NTSC):
1 S-Video out (S terminal) 1 Vp-p 75 ≠, termination
106
VQT3C14
(excluding the projecting parts)
(including the projecting parts)
[BWT800] Approx. 3.2 kg
[BWT700] Approx. 3.0 kg
AC 220 to 240 V, 50 Hz
[BWT800] Approx. 36 W
[BWT700] Approx. 35 W
Approx. 0.2 W
[BWT800] Approx. 6.0 W
[BWT700] Approx. 5.0 W
5 oC to 40 oC
10 % to 80 % RH
(no condensation)
DVB-T
Australia
6~12
27~69
Not provided
MPEG2 (Hybrid VBR)
MPEG-4 AVC/H.264
∫ Audio
Recording system:
Dolby Digital (2ch)
Dolby Digital (Max 5.1ch)
(DR, HG, HX, HE, HL, HM mode)
HE-AAC (2ch)
MPEG (2ch)
Audio in:
Input level:
Input impedance:
Audio out:
Output level:
Output impedance:
Digital audio out:
Optical terminal (PCM, Dolby Digital, DTS, MPEG)
Coaxial terminal (PCM, Dolby Digital, DTS, MPEG)
HDMI terminal
(PCM, Dolby Digital, DTS, MPEG, Dolby Digital Plus,
Dolby TrueHD, DTS-HD Master Audio,
∫ HDMI Output
≥This unit supports "HDAVI Control 5" function.
∫ Other terminals
USB Port
SD Card Slot
LAN (Ethernet) Port
∫ Internal HDD capacity
∫ WLAN
Antenna:
Standard compliance:
Transmission system:
Transfer rate (standard)
IEEE802.11n
IEEE802.11g / IEEE802.11a
IEEE802.11b
Access mode:
Security :
§2
Transfer rates are theoretical values; however, actual
§1
communication rate will vary according to
communication environment or connected
equipment.
This unit supports WPA and WPA2 encryption.
§2
(XP, SP, LP, EP mode)
(DR mode)
(DR mode)
1 Audio input (pin jack)
Standard: 0.5 Vrms,
Full scale: 2.0 Vrms at 1 kHz
More than 10 k≠
1 Audio output (pin jack)
Standard: 0.5 Vrms,
Full scale: 2.0 Vrms at 1 kHz
Less than 1 k≠
DTS-HD High Resolution Audio)
[BWT800] 19 pin type A: 2 pcs
[BWT700] 19 pin type A: 1 pc
Type A: 2 pcs
10BASE-T/100BASE-TX
[BWT800] 1 TB
[BWT700] 500 GB
Tx 1, Rx 2
IEEE802.11n/
IEEE802.11a/
IEEE802.11g/
IEEE802.11b
MISO-OFDM system/
OFDM system/
DSSS system
:
§1
(Tx Max 150 Mbps)/
(Rx Max 300 Mbps)
(Max 54 Mbps)
(Max11 Mbps)
Infrastructure mode
WPA2-PSK (TKIP/AES)/
WPA-PSK (TKIP/AES)/
WEP (64 bit/128 bit)
1 pc