Panasonic DMR-BWT800 Operating Instructions Manual page 17

Via an HDMI AV OUT (MAIN) and
HDMI AV OUT (SUB) terminal
[BWT800]
You can enjoy richer sound by using the HDMI AV OUT
(SUB) terminal.
3D programmes can be played back when this unit
is connected to a 3D compatible TV using an HDMI
cable.
≥Connect the TV and the amplifier with the following
cables to enjoy the audio from the TV with the
amplifier.
– ARC compatible: HDMI cable
– ARC not compatible: HDMI cable and optical digital
cable
TV
HDMI IN
RF IN RF IN
10BASE-T/
100BASE-TX
RF OUT RF OUT
This unit's rear panel
HDMI cable
Amplifier
≥ The VIERA Link function does not work with equipment connected to the
HDMI (SUB) terminal.
≥ Set the "HDMI (SUB) Output Mode" to "V. OFF ( Video Off )".
If it is set to "Normal" when the amplifier not compatible with 3D is
connected to the HDMI (SUB) terminal, playback of 3D video is not
possible with the power of the amplifier set to "ON". (
Output Mode)
HDMI cable
MAIN MAIN SUB SUB
COMMUNICATION
OPTICAL COAXIAL
CAMERA
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
HDMI IN
86, HDMI (SUB)
When using DIGITAL AUDIO OUT
terminal
∫ Using Optical digital audio cable
OPTICAL IN
Optical digital
audio cable
MAIN MAIN SUB SUB
COMMUNICATION
OPTICAL
CAMERA
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
∫ Using Coaxial cable
COAXIAL IN
Coaxial cable
MAIN MAIN SUB SUB
COMMUNICATION
CAMERA OPTICAL COAXIAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
≥ When connecting a TV with an HDMI OUT terminal, set "HDMI Audio
Output" to "Off" ( 86).
≥ When you use the optical digital audio cable, insert the tip correctly into
the terminal.
Amplifier
COAXIAL
R - AUDIO- L VIDEO
This unit's rear panel
Amplifier
R - AUDIO- L VIDEO S VIDEO
This unit's rear panel
S VIDEO
17
VQT3C14