Selling Point Descriptions - Hitachi C 10FM Technical Data And Service Manual

4-1. Selling Point Descriptions

(1) Press cutting
Maker
Model
Max. cutting
dimension
Height x Width
(H x W)
Press cutting with the head swiveling enables cutting square workpieces as large as shown in Table 1 in a single
sawing operation. (See Fig. 1.)
(2) Miter cutting facility
Maker
Model
Max. cutting
dimension
Right and left 45˚
Height x Width
(H x W)
By turning the table to the right or left as desired, the Model C 10FM is capable of miter cutting of up to 45˚ to the
right and left.
(3) Equipped with debris guard to restrict dispersion of chips for enhanced safety in operation.
A debris guard has been adopted to prevent wood chips from adhering to the saw blade at the end of the
cutting operation.
(4) Lightweight design
12.4 kg in weight, for easy transport in a workshop
Table 1
(Unit: mm)
HITACHI
C 10FM
66 x 144 (2-19/32" x 5-11/16")
79 x 108 (3-1/8" x 4-1/4")
90 x 90 (3-9/16" x 3-9/16")
with aux. board width
19 mm (3/4")
Table 2
(Unit: mm)
HITACHI
C 10FM
68 x 98
(2-11/16" x 3-7/8")
Workpiece
Workpiece
45˚ right and
left
--- 2 ---
Width (W)
Height (H)
Fig. 1
Width (W)
Height (H)
Fig. 2