D-Link DWL-AG520 Manual page 37

Troubleshooting
Check that the Network Connection for the wireless client is
!
configured properly. Select AP (Infrastructure) when connecting
to an access point and select Ad-Hoc mode when connecting
without an access point. Double-click on the WLAN icon in the
taskbar > click on Configuration to change the settings for the
wireless adapter.
!
If Security is enabled, make sure that the correct encryption keys
are entered on both the DWL-AG520 and the access point. Double-
click on the WLAN icon in the taskbar > click Encryption. Check to
see that the key selected is set to the same key as other devices on
the network.
! If Turbo mode is enabled, make sure that Turbo mode is enabled
on all Turbo mode compatible devices in your network, in order to
communicate.
7. How can I troubleshoot distance issues using the DWL-AG520.
Move the DWL-AG520 and Access Point or wireless Router into
!
the same room and then test the wireless connection.
!
Change the channel of the Access Point.
Move devices within the line of sight
!
37