Bosch Integral TM13 Operating Instructions Manual page 113

Autom. post dialing/DTMF
Your telephone has been factory-set so that while connected all key de-
pressions can be sent as tones. You can also turn off this function and
initiate the postdialing manually while connected.
B
Balancing handsfree calling -
(only TH and TM) With this you can additionally adjust the setting for hands-
free talking to room conditions. Your telephone must be designed with the
comfort handsfree equipment for this. If necessary, consult your BOSCH
TELECOM Service.
Baud rate AT
Here you can define the baud rate of your telephone for data transmission.
Available values are 1200, 2400, 4800 and 9600.
This menu item only appears if you have set the AEI mode of operation to
"AT command".
C
Callback
If a called party is busy, you can program your phone to transmit a signal as
soon as the line is free again. Your phone and the phone of the previously
busy subscriber then ring and you can set up the call.
However, this is only possible for calls within your system. You can request
several callbacks.
Call diversion
You can divert calls to other telephones, even external ones. If you receive
a diverted call, the caller's name appears on your display if it is stored in
your local telephone book.
Call list
You can activate or deactivate the call list.
Call list: ELC in
Enter the external line code that is entered in the call list with your calls.
Call list: ELC out
Enter the external code that you normally use for external calls.
Menu items on the display "
(! p. LEERER MERKER)
p. 135)
If in doubt, look it up
113