Bosch Integral TM13 Operating Instructions Manual page 124

If in doubt, look it up
Outgoing sensitivity -
This function permits you to adjust the sensitivity for the handsfree mode to
better adapt it to the surroundings. The best is to use the lowest possible
setting.
If your telephone is equipped with a deluxe handsfree unit you can also use
this function to vary the echo and the amplification. A higher level results in
an amplification of the microphone signal. If required please contact your
BOSCH TELECOM Service.
Own call number
Assignment: You can store your own call number so that it is shown on the
display.
P
Parity (AT)
This option permits you to define the parity for the control of your telephone.
Available settings are "None", "Even" and "Odd".
It only appears if the AEI mode of operation has been set to "AT command".
Part of group
You can switch your phone in and out of a hunt group. This function must
be enabled by your BOSCH TELECOM service representative.
Partner
Set the partner functions and partner display as you wish.
Partner beep on
To activate call duplication for partners.
Partner div. off
To deactivate a partner diversion.
Partner div. 212 to 243
Partner diversion: You are asked whether this diversion should be deleted.
Pick up a call
You can pick up calls for other users on your telephone. Enter the call num-
ber and then select the menu item.
124
Menu items on the display "