Vgs-1 Optional Voice Guide & Storage Unit - Kenwood Nexedge NX-200G Instruction Manual

VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
Note: If use the VGS-1 unit, the GPS unit must be removed. Please
ask your dealer.
VOICE RECORDER
The voice recorder allows you to record conversations and
create voice memos.
■ Auto Recording
If activated, the auto recorder will continuously record all
transmitted and received signals. The recording storage
area retains only the last 30 seconds of recording.
■ Voice Memos
To record a voice memo for later playback:
1 Press the key programmed as [Voice Memo], press and
hold the key programmed as [Playback], or access the
Menu {page 13}.
• The duration of recording memory will appear on the
display and begin counting down.
2 Speak into the microphone to record your memo.
3 Press
• If the memory becomes full, recording will stop and the
voice memo will be stored in memory.
■ Auto Reply Message
You can set the transceiver to automatically respond to
Individual Calls while using FleetSync/NXDN.
1 Press the key programmed as [Auto Reply Message]
to enter Auto Reply Message mode.
2 When you receive an Individual Call, the transceiver will
send an automatic response to the caller after
3 seconds, and "GREETING" appears on the display.
to end the recording and store it in memory.
33