Removal And Replacement; Table 2-1. Removal Cross-Reference - HP OmniBook 7100 Service Manual

This chapter tells you how to remove and replace the following components and assemblies. The ones
•
marked by below are user-replaceable.
Audio heatsink (table on page 2-23).
Audio jack cover (table on page 2-23).
Audio PCA (table on page 2-23).
• Battery (page 2-3).
• Battery faceplate (table on page 2-7).
• BIOS cover (table on page 2-7).
BIOS IC (page 2-19).
Bottom case (page 2-15).
CPU fence (table on page 2-23).
CPU module (MMO) (table on page 2-23).
Display bezel (table on page 2-21).
Display bracket (table on page 2-21).
Display cable (table on page 2-21).
Display case (table on page 2-21).
Display latch (table on page 2-21).
DC-DC PCA (table on page 2-23).
End cap (table on page 2-21).
Fan (table on page 2-23).
• Feet (table on page 2-7).
Front-IR PCA (table on page 2-23).
• Hard disk drive (page 2-5).
Heatsink, CPU (page 2-9).
Hinge (table on page 2-21).
Caution
Always provide proper grounding when performing repairs. Without proper grounding, an
electrostatic discharge may damage the OmniBook and its components.
HP OmniBook 7100

Removal and Replacement

Table 2-1. Removal Cross-Reference

Hinge cover (table on page 2-22).
Hinge mount (table on page 2-23).
Icon PCA (table on page 2-22).
Inverter PCA (table on page 2-21).
• I/O door (table on page 2-7).
Keyboard (page 2-8).
LCD module (page 2-11).
LCD shield (table on page 2-21).
LVDS PCA (table on page 2-23).
Motherboard PCA (page 2-15).
Motherboard frame (table on page 2-23).
PCMCIA shield (table on page 2-23).
PCMCIA socket (table on page 2-23).
• Plug-in module (page 2-3).
Pointer-control PCA (table on page 2-23).
• RAM board (page 2-4).
• RAM cover (table on page 2-7).
• Screw cover (table on page 2-7).
Speaker (table on page 2-22).
Top case (page 2-14).
Touch-pad cable (table on page 2-22).
Touch-pad PCA (table on page 2-22).
Video PCA (table on page 2-23).
Removal and Replacement
2
2-1