Meshtray Configuration Tab; Figure 21. Meshtray Status Tab - Motorola WMC6300 User Manual

3.1 wireless modem card

Hide thumbs Also See for WMC6300:

Table of Contents

MEA

WMC6300 Pocket PC Users Guide

Figure 21.

MeshTray Status Tab

MeshTray Configuration Tab

The Configuration Tab has a drop down selection that allows the user to select it's mode of

operation; Infrastructure or Ad-Hoc Peer-to-Peer. Infrastructure mode allows the user to use

equipment deployed by the network operator to access the Internet. Peer-to-Peer mode allows

users to communicate among them selves without accessing a wired network.

If Geo-Position has been enabled on the WMC6300, the Geo-Position option will be selectable

and the user may configure the reporting interval as shown in Figure 22. Otherwise, the Geo-

Position box will be grayed out as shown in Figure 25. Likewise, if Enhanced Geo has been

enabled on the WMC6300, an additional checkbox will appear to allow the user to select that

mode. Refer to the section on the Geo Position Tab for additional information.

Table of Contents