Priority; Figure 22. Meshtray Configuration Tab (1) - Motorola WMC6300 User Manual

3.1 wireless modem card

Hide thumbs Also See for WMC6300:

Table of Contents

Figure 22.

MeshTray Configuration Tab (1)

Priority

The User Priority service can be provisioned on a per node basis for use with tiered service and

emergency access systems. This priority feature is unique to the MEA network and only exists

between endpoints within the MEA network or between a MEA network node and the

ingress/egress node on the MEA network.

Nodes outside of the MEA Core LAN cannot request a particular priority for transmitted or

received traffic. Any traffic into the MEA network needing prioritization must be prioritized at the

ingress access point or router.

Any traffic out of the MEA network will lose its priority

assignment at the egress.

MEA wireless traffic will carry priorities attached to each packet. The MeshAPI can be used to

tune the default priority of the local node.

There is also an optional Emergency mode for use by special applications. The priority for use

in emergency mode is separately provisioned and must be explicitly enabled per node by the

network operator.

Table of Contents