Ag-Dvc30 (Or Ag-Dvc32) - Panasonic AG-MYA30G Operating Instructions Manual

1
Mount the metal fitting on the handle provided with the AG-DVC30 (or AG-DVC32)
using the 6 mrn long flush-head screws.
I
Anchoring screws Melal fittIng
~~
~~_·_·~~~~~"·1
~ ~
6
mm
flush head screws
Connector cover
Connector cover
(provIded)
XLR ADAPTER
connector
2
Install the handle on the AG-DVC30
(or AG-DVC32).
4
Remove the connector cover of the
AG-DVC30 (or AG-DVC32), and pull it
out in the direction indicated by the
arrow.
3
Insert the shoe of the adapter into the
metal fitting, and secure the adapter
by
tightening the anchoring screws.
5
Attach the connector cover supplied
with the adapter to the AG-DVC30 (or
AG-DVC32)
so
that the connectors are
covered.
• Attach the connector cover by using
a thin round-tipped implement to
push it into place.
When doing this, take care not to
damage the AG-DVC30 (or AG-
DVC32).
6
Connect the adapter's cable to the
XLR ADAPTER connector on the AG-
DVC30 (or AG-DVC32).
E-6