Motorola GMLN1040 User Manual page 18

USING THE STANDARD DATA CABLE
Note: A data application program, installed on the computer is required
to be able to conduct a data session.
Connect the data cable (not supplied) from the data port on the Digital
Car Kit Junction Box to the serial communication port of the computer.
CLEANING OF CONNECTORS AND CONTACTS
Clean all connector pin and battery charge contact surfaces of the
Vehicle Adapter every three months, the RF contact surfaces of the
antenna adapter and the bottom connector contact surfaces of the
MTP700 Portable radio.
Note: Always use a fresh supply of alcohol and a clean container to
prevent contamination by dissolved material from previous use.
16