Motorola GMLN1040 User Manual page 6

FITTING THE RF SWITCH ADAPTER
1. Unscrew the radio antenna from the radio.
2. Screw the antenna to the RF Switch Adapter. Hold the black upper
plastic part of the adapter with your fingers and rotate the antenna
until it sits fixed on the adapter.
3. Position the nose on the downside of the adapter so that it fits into
the slot of the radio's antenna socket (see figure 1).
4. Hold the antenna or the black upper part of the adapter with your
fingers and turn the serrated metal wheel to screw the adapter into
the antenna socket. To fasten the adapter with the delivered
mounting tool, hold the radio with one hand, position the nose of
the mounting tool into one of the holes on the serrated metal wheel
and rotate the serrated metal wheel until it sits firmly on the radio's
antenna socket.
Note: With the RF Switch fitted there may be some degradation in radio
performance (up to 1.5dB). When the portable radio is operated in the
Vehicle Adapter, the vehicle antenna compensates for this degradation
and improves the overall radio performance.
Figure 1. Fitting the RF Switch Adapter
4
Never rotate the antenna or the black upper plastic
part of the adapter to fasten or unfasten the adapter
while in the radio's antenna socket. Doing so will
damage the adapter or the radio's antenna socket.
Always use the mounting tool supplied to rotate the
serrated metal wheel while holding the radio with
the other hand.