Advertisement
To remove the battery pack from the tool, press the release button and firmly pull the
battery pack out of the tool handle. Insert it into the charger (Fig. 2) as described in
the charger section of this manual.
Switch (Fig. 3)
To turn the light on, slide the switch to the
side. To turn it off, slide the switch back.
Replacing the Light Bulb
(Fig. 4, 5)
Floodlight
Replacement
Cat. No.
Bulb Cat. No.
DC509
DW9083
WARNING
: Burn
Hazard. Lens and bulb
become hot during use.
Do not touch lens sur-
face when bulb is lit or
immediately after use.
WARNING
: Fire Hazard. Lens and bulb
become hot during use. Do not cover with
cloth or other flammable materials due to
increased risk of fire.
FIG. 3
SWITCH
TO REPLACE THE LIGHT BULB
POWER PACK (NOT INCLUDED)
NOTE: Do not look directly into the flexible floodlight beam.
MAINTENANCE
Cleaning
CHARGER CLEANING INSTRUCTIONS
charger from the AC outlet before cleaning.
4
FIG. 5
FIG. 4
LENS
HOLDER
BULB
1. Remove lens holder by turning counterclockwise.
2. Remove bulb from spring.
3. Insert a replacement bulb.
4. Replace lens holder by turning clockwise..
WARNING
: Shock hazard. Disconnect the
Advertisement
