Technical Data - Husqvarna Rider 320 AWD Operator's Manual

Dimensions
Length without cutting unit, mm/ft
Width without cutting unit, mm/ft
Height, mm/ft
Machine without cutting unit, with empty tanks, kg/lb 225/496
Wheel base, mm/ft
Track width, front, mm/ft
Track width, rear, mm/ft
Tyre dimensions
Air pressure, rear - front, kPa / bar / PSI
Max. gradient
Engine
Brand / Model
Nominal engine output, kW (see note 1)
3
Displacement, cm /cu.in
Max.motor speed, r/min
Fuel, minimum octane grade lead-free
Tank volume, litres/USqt
Oil
Oil volume incl. filter
Oil volume excl. filter, litres/USqt
Starting
Electrical system
Type
Battery
Spark plug
Electrode gap, mm/inch
Noise emissions and cutting width (see note 2)
Sound power level, measured dB (A)
Sound power level, guaranteed dB(A)
Cutting width, mm
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A)
Vibration levels (see note 4)
Vibration level on the steering wheel, m/s
Vibration level in the seat, m/s
Transmission
Brand
Oil, class SF-CC
Cutting unit
Type
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power
output for the engine installed on the final machine will depend on the operating speed, environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.2 dB(A).
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation)
2
of 0.2 m/s (steering wheel) and 0.8 m/s
30 –
English

TECHNICAL DATA

Rider 318
2020/6,61
890/2,92
1150/3,77
887/2,91
712/2,34
627/2,06
16 x 6,50 x 8
60 (0,6/8,5)
10°
Briggs & stratton / 31L7
9,6
500
2900 ± 100
85
12/13
Class SF, SG, SH or SJ SAE40,
SAE30, SAE10W-30, SAE10W-40
or SAE5W-20
1,6/1,7
1,4/1,5
Electric start 12V
12 V, negative earthed
12 V, 24 Ah
EMS PLATINUM
0,75/0,030
98
99
94-103-112/37-41-44
83
2
2,5
2
0,7
Tuff Torq K46
SAE 10W/40
Combi 94
Combi 103
Combi 112
2
(seat).
Rider 320 AWD
2020/6,61
890/2,92
1150/3,77
244/538
887/2,91
712/2,34
627/2,06
16 x 6,50 x 8
60 (0,6/8,5)
10°
Briggs & Stratton / 31Q6
9,6
500
2900 ± 100
85
12/13
Class SF, SG, SH or SJ SAE40,
SAE30, SAE10W-30, SAE10W-40
or SAE5W-20
1,6/1,7
1,4/1,5
Electric start 12V
12 V, negative earthed
12 V, 24 Ah
EMS PLATINUM
0,75/0,030
98
99
94-103-112/37-41-44
83
2,5
0,7
K 574 KTM 10L
SAE 10W/50 Synthetic
Combi 94
Combi 103
Combi 112
) in conformity with EC directive 2000/14/EC.
WA