Bios Setup; Starting Bios Setup - Fujitsu Stylistic 3500 Technical Reference Manual

BIOS data resides in the system's CMOS memory. When the system is powered on, BIOS data is copied or
"shadowed" into the system's dynamic memory and the system runs using BIOS parameters stored in
dynamic memory.

BIOS Setup

BIOS Setup is a configuration utility that you can use to change your system's permanent BIOS settings.
The BIOS Setup application is stored in the BIOS flash ROM. (BIOS Setup values or settings are stored in
CMOS memory.) Instructions for starting and running BIOS Setup are given in the following discussions.

Starting BIOS Setup

To start BIOS Setup, restart your system and when the following message is displayed,
<F2>, Double tap the pen+: BIOS Setup
Double-tap the pen on the display screen or press F2 on your external keyboard.
The system starts BIOS Setup and the BIOS Setup Main menu is displayed. Note that the system can be
configured to start without displaying the message above. If this is the case, you must attach an external
keyboard and hold down the F2 key while you start your system until the BIOS Setup screen is displayed.
Options and settings for menus in BIOS Setup are described in tables appearing later in this chapter.
BIOS Setup
3
3
5