Dc Power Inputs; Table 7-1. Dc Input Connectors - Fujitsu Stylistic 3500 Technical Reference Manual

DC Power Inputs

External DC power can be connected at three locations on the pen tablet:
• DC power connector on the pen tablet
• System interface connector
• DC input positions of the high-usage contacts
A DC power source connected to any of these inputs must provide 3.36 amps at a continuous DC voltage
of 16 volts ±10%. Specifications for the DC input connectors on the pen tablet and port replicator are
given below.
Connector type
Connector vendor
Vendor part number*
Pin assignments
* This is the part number for the female DC input connector on the pen tablet and the port replicator.

Table 7-1. DC Input Connectors

EIAJ RC-5320A Type 5
Hosiden
HEC3900-01-010
Center conductor: +16 VDC ±10%
Sleeve: ground
System Power Hardware
7
67