NEC NEAX 2000 IVS User Manual page 41

Getting Started
Action: Listen to the modem while it dials to
determine that a busy signal is received.
Reasons:
Action: Listen to the modem while it dials to
determine that the PBX answered. Watch for a
Connect message.
Reasons:
Action: Listen to the modem while it dials to
determine that an answer was received. Watch
for the Connect message, followed by the
Carrier Detect message.
Reason: Possible incorrect PBX command.
Do not use PBX Command 40, YY=11, Second
Data = 5.
Note:
Page 34
PBX power is off
A valid station number is not assigned to the
built-in PBX modem
Busy Signal
Incorrect phone number
PBX modem is being accessed by another
user
Ring and Answer, but no connect
message
PC modem's highest speed is less than the
PBX modem's speed
Inappropriate initialization string
Connect message, but no carrier detect
message
If you are an advanced user, you can change
any of the PBX configuration settings using
the PBX Configuration dialog. This dialog
is accessed from the PAM by selecting PBX
Configuration from the Edit menu, then
selecting Dialog View .
MATWorX 32 User's Guide
NDA-24215 Revision 1.0