NEC NEAX 2000 IVS User Manual page 69

Extended Command Set
@20X (where X represents the Numbering Plan
^90
@980
?1X
?2X
*X
!
Page 62
Group 0 - 3) Finds the Access Codes assigned
to the Feature Code displayed in the First
Data field. The first returned Access Code is
displayed in the SD field. Additional Access
Codes are displayed in the ED field.
Copies the Programmable Key assignments
from the station in the First Data field to the
station in the Second Data field.
Determines whether an Add-On exists for the
station in the First Data field.
(where X represents any command from the
NEAX2000 IVS Command Set) Uses the
First Data specified in the previous command
as the First Data in this command. (Leave this
Second Data field blank.)
(where X represents any command from the
NEAX2000 IVS Command Set) Uses the
Second Data, that was specified or returned
as a result of the previous command, as the
First Data in this command. (Leave this
Second Data field blank.)
(where X represents any command from the
NEAX2000 IVS Command Set) Performs a
PBX System Reset after executing the
specified command. This operation will drop
all calls, and should not be used with modem
connections—only with direct connections.
Performs a PBX System Reset. This
operation will drop all calls, and should not
be used with modem connections—only with
direct connections.
MATWorX 32 User's Guide
NDA-24215 Revision 1.0