Divar - Easy | Installation Manual | Hardware setup
Rack mounting
The Divar can be mounted in a 19-inch rack. A rack mounting kit is supplied
with the unit that includes:
•
left and right rack mount ears
•
four Torx screws with integrated lock washers.
•
a Torx screwdriver
Mounting
1. Remove the four Torx screws (two on each side) located near the front panel
on the right and left side of the housing.
2. Attach the mounting ears to each side ensuring that the lip is under the unit.
Use the four Torx screws with lock washers and tighten securely.
3. Install the unit into the rack using the rack manufacturer's supplied hardware.
When installing the assembly into the rack, be careful not to restrict airflow
around the vent holes located in the side panels or to exceed the recommended
operating temperature.
Bosch Security Systems
Camera connections
Connect cameras to the unit using 75-ohm video coaxial cables with BNC
connectors. The Divar automatically configures itself as a PAL or NTSC unit.
The unit determines the standard by detecting the signal format of the first
connected camera (lowest camera input number).
Specification
Input signal:
Composite video 1Vpp, 75 Ohm
Color standard:
PAL/NTSC, auto-detect.
Gain control:
Automatic or manual gain control for each video input.
Connector type:
BNC, automatic termination.
EN | 4-2