D-Link DIR-615 User Manual page 35

Section 3 - Configuration
Ths wll allow you to open a sngle port. If you would lke to open a range of ports, refer to the next page.
Name:
Enter a name for the rule or select an applcaton from the drop-
down menu. Select an applcaton and clck << to populate the
fields.
IP Address:
Enter the IP address of the computer on your local network that
you want to allow the ncomng servce to. If your computer s
recevng an IP address automatcally from the router (DHCP),
you computer wll be lsted n the "Computer Name" drop-down
menu. Select your computer and clck <<.
Private Port/
Enter the port that you want to open next to Prvate Port and
Public Port:
Publc Port. The prvate and publc ports are usually the same.
The publc port s the port seen from the Internet sde, and the
prvate port s the port beng used by the applcaton on the
computer wthn your local network.
Protocol Type:
Select TCP, UDP, Both.or.Other.from the drop-down menu.
Inbound Filter:
Select Allow. All (most common) or a created Inbound filter.
You may create your own nbound filters n the Advanced. >.
Inbound.Filter page.
Schedule:
The schedule of tme when the Vrtual Server Rule wll be
enabled. The schedule may be set to Always, whch wll allow
the partcular servce to always be enabled. You can create your
own tmes n the Tools > Schedules secton.
D-Lnk DIR-615 User Manual 31