Configure Wpa-EnterprSe (Radius) - D-Link DIR-615 User Manual

Section 4 - Security
Configure WPA-Enterprise (RADIUS)
It s recommended to enable encrypton on your wreless router before your wreless network adapters. Please establsh wreless connectvty before
enablng encrypton. Your wreless sgnal may degrade when enablng encrypton due to the added overhead.
1.. Log nto the web-based configuraton by openng a web browser and enterng the IP address of the router (192.168.0.1). Clck on.Setup.and
then clck.Wireless.Settings on the left sde.
2. Next to Security Mode, select WPA-Enterprise.
Note: The user must disable Wi-Fi Protected Setup in order to select WPA-
Enterprise.
3. Next to WPA Mode, select Auto, WPA2.Only, or.WPA.Only. Use Auto f you have
wreless clents usng both WPA and WPA2.
4. Next to Cypher Type, select TKIP.and.AES, TKIP, or AES. If you have wreless
clents that use both types, use TKIP.and.AES.
5. Next to Group Key Update Interval, enter the amount of tme before the group
key used for broadcast and multcast data s changed (3600 s default).
6. Next to Authentication Timeout, enter the amount of tme before a clent s
requred to re-authentcate (60 mnutes s default).
7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server.
8. Next to RADIUS Server Port, enter the port you are usng wth your RADIUS server.
1812 s the default port.
9. Next to RADIUS Server Shared Secret, enter the securty key.
10. If the MAC Address Authentication box s selected then the user wll need
to connect from the same computer whenever loggng nto the wreless
network.
D-Lnk DIR-615 User Manual 85