Sharp Zaurus SL-C3000 Instruction Manual page 66

my Zaurus SL-C3000 and SL-C3100
xx:xx:xx:xx:xx:xx K750i
xx:xx:xx:xx:xx:xx OQOU1
xx:xx:xx:xx:xx:xx C3000
To find out the capabilities of those devices do the following with their corresponding mac address:
# sdptool browse xx:xx:xx:xx:xx:xx
You can initiate the pairing from each of those devices and make sure the PIN matches. The Zaurus
stores its PIN in /etc/bluetooth/getpin and /etc/bluetooth/pin
/etc/bluetooth/pin contains the pin number that you enter in any other Bluetooth device that pairs
with the Zaurus.
/etc/bluetooth/givepin contains the pin number that your Zaurus will automatically give to another
Bluetooth device if pairing from the Zaurus. givepin is a script which must print out a string of the
format "PIN:1234" where 1234 is the pin number, so you only change that part of the script to
change to pin number.
Once the devices are paired with your Zaurus and you have determined what capabilities they have,
you can setup and configure your Zaurus to use them.
The bluetooth qshdlg GUI or the network config tools plugins can be used to configure the following.
66 of 212
http://www.users.on.net/~hluc/myzaurus/
16/09/2007 12:23