Dell Latitude D500 Service Manual page 37

Display Assembly and Display Latch: Dell Latitude D500 Service Manual
CAUTION: Before performing the following procedures, read the safety
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by touching an unpainted metal surface on the computer.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the
4. Remove the two M2 x 5-mm screws from each side of the display panel.
5. Lift the display panel, and rotate the display panel out of the display cover.
6. Press in both sides of the top flex-cable connector, and pull the top flex-cable
connector away from the display connector.
7. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter
connenctor.
file:///F|/Service%20Manuals/Dell/Latitude/d500/display.htm (6 of 9) [2/28/2004 8:08:26 AM]
"Preparing to Work Inside the
display bezel.
Computer."