Removing The Microprocessor Thermal-Cooling Assembly - Dell Latitude D500 Service Manual
Dell latitude d500 service manual
Hide thumbs
Also See for Latitude D500:
- System information manual (198 pages) ,
- Service manual (40 pages) ,
- Installing and configuring (38 pages)
Table of Contents
Advertisement
Microprocessor Thermal-Cooling Assembly: Dell Latitude D500 Service Manual
Back to Contents Page
Microprocessor Thermal-Cooling
Assembly
Dell™ Latitude™ D500 Service Manual
Removing the Microprocessor Thermal-Cooling
Assembly
CAUTION:
instructions in your System Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
1. Follow the instructions in
2. Remove the keyboard.
NOTE:
You can remove the microprocessor thermal-cooling assembly with the
fan attached.
3. Loosen in consecutive order the four captive screws, labeled "1" through "4,"
that secure the microprocessor thermal-cooling assembly to the system board.
file:///F|/Service%20Manuals/Dell/Latitude/d500/thermal.htm (1 of 3) [2/28/2004 8:08:30 AM]
Before performing the following procedures, read the safety
"Preparing to Work Inside the
Computer."
Advertisement
Table of Contents
