Hkcu1005 Sdi Output Expansion Unit (Optional) - Sony HD Super Motion HKCU1001 Quick Manual

For details on these operations, refer to the Master Setup
Unit or Remote Control Panel manuals.
c WF OUT (waveform monitor output) connector
(BNC-type)
Outputs the video signal for a waveform monitor selected
with the WF MONITOR button of an RCP-700/900 series
Remote Control Panel or MSU-900 series Master Setup
Unit.
For details on these operations, refer to the Master Setup
Unit or Remote Control Panel manuals.
HKCU1005 SDI Output Expansion
Unit (optional)
Note
To reduce the risk of electric shock, fire or injury, do not
open the cabinet. To adjust the internal settings, refer to
qualified service personnel.
The HKCU1005 consists of a DRX front board and a HIF
rear boards.
When these boards are installed in the front and rear
expansion slots of the unit, four SDI output connectors are
added to the unit.
For details on installation, contact a Sony service or sales
representative.
DRX Board
DRX
1080
720P
SD
PsF
FC
1 Output signal format indicators
60
50
30
25
24
a Output signal format indicators
Displays the format status of the output signal.
1080/720P/SD: One of these indicators corresponding to
the signal status of the SDI OUTPUT 1, 2 connectors
of the four SDI signal output from this unit lights.
42
Locations and Functions of Parts
PsF: Not function
FC: Lights when the frame rate converter function of the
unit is performed.
60/50/30/25/24: One of these indicators corresponding to
the field/frame frequency of the output signals lights.
Note
The 30, 25, and 24 indicators do not function on the
HDCU3300.
HIF Board
SDI OUT
1
2
1 SDI OUT1, 2, 3, 4 connectors
3
4
a SDI OUT1, 2, 3, 4 (HD/SD serial digital interface
output 1 to 4) connectors (BNC-type)
The signal from the video camera is supplied as four HD-
SDI or SD-SDI signals.