Internal Switches And Internal Boards; Internal Switches; Internal Boards - Sony HD Super Motion HKCU1001 Quick Manual

Internal Switches and

Internal Boards

CAUTION
To reduce the risk of electric shock, fire or injury, do not
open the cabinet. To adjust the internal settings, refer to
qualified service personnel.

Internal Switches

The following switches are located inside the unit, behind
the front panel:
2 Program audio mix switch (S3)
1 Intercom switch (S2)
CABLE ON
MIC
ALARM
OFF
SHORT OPEN
MAIN CAMERA
INTERCOM
POWER
1
3 Headset microphone switch 1 (S4)
4 Headset microphone switch 2 (S5)
a Intercom switch (S2)
Selects the pathway of intercom signals output/input
through the INTERCOM connector.
PROD: Producer line
PRIV: Producer line and engineer line are ignored, and
communication is possible only between this unit and
the video camera connected to this unit.
ENG: Engineer line
b Program audio mix switch (S3)
Set whether or not to output the program audio to the
INTERCOM connector.
c Headset microphone switch 1 (S4)
Set the switch according to the type of microphone of the
headset connected to the INTERCOM connector on the
front panel of this unit:
CARBON: Carbon microphone (power supply, 20 dB
ECM: Electret condenser microphone (power supply, 40
DYNAMIC: Dynamic microphone (no power supply, 60
d Headset microphone switch 2 (S5)
When you set headset microphone switch 1 (S4) to
DYNAMIC, also set this switch according to the type of
output of the headset microphone.
ON: Unbalanced type
OFF: Balanced type
Internal Boards
AT Board
S2 S3
PGM ON
PGM OFF
S5
O N
S4
OFF
a ACCESS indicator
Shows the status of the "Memory Stick."
b "Memory stick" slot
Insert an upgrade "Memory Stick" to upgrade the software
version of this unit.
To insert a "Memory Stick"
gain)
dB gain)
dB gain)
AT
1 ACCESS indicator
2 "Memory stick" slot
3 Ethernet indicator
REFERENCE
REF IN
4 REFERENCE indicators and switch
UN
LOCK
HD
RMT
SD
H PHASE
ADV
5 H PHASE switch
DELAY
Indication Meaning
Off No "Memory Stick" is inserted.
Lit in green There is a "Memory Stick" in the slot.
Lit in red Data is being read/written. If you eject the
"Memory Stick" during this operation, the
integrity of the data is not guaranteed. All the
data may be lost.

Internal Switches and Internal Boards

43