Selecting A Wash Cycle - Bosch SHU 8800 Use And Care Manual

Selecting a Wash Cycle

The dishwasher will wash and dry the contents based
on cycle selection made. Refer to Tables 3, 4 and 5:
Wash Cycle Selection Chart to select the most ap-
propriate cycle for the wash load.
Follow these steps to select a cycle and start the
dishwasher:
SHU/SHI Models:
1. Close the dishwasher door, making sure
that door latches are closed.
2. Press the on/off switch.
3. Select the button for the program
desired.*
4. The dishwasher will start automatically
and continue to the end of the selected
cycle.
5. At the end of the cycle the dishwasher
will stop and either the "Clean" light will
become illuminated, the LED display will
show"CL" or "0", or the dishwasher will
beep.
SHU 9910/9920/9950/ 8800 & 8810
Models & SHV Models:
1. Open dishwasher door.
2. Press the on/off switch.
3. Push the button once for the program
desired.
4. Close door until it latches and the pro-
gram will begin.
5. Same as #5 above.
Push the desired button TWO TIMES
if another program button is lit up.
SELECTING A WASH CYCLE
Figure 24
Figure 25
Figure 26
*
*
*
www.boschappliances.com
Note: All indicator lights will
remain illuminated until the on/
off switch is pressed or the door
is opened.
Various Model Types
SHU/SHI
On / Off
Power
SHU 9950
INTEGRA Ltd.
On/Off
SHU 9910/9920 & SHV Models
On
Off
VARIOUS END OF
CYCLE INDICATORS
Clean light illuminates
CL or 0 is displayed on the LED.
Cycle Completion Beeper sounds off
CycleCountdown Refill
88 Power Scrub Regular Delicate/ Quick Rinse & Rinse
Scrub Wash Wash Econo Wash Hold Agent
Plus
Delay Top
Start Rack
Cancel
Hours Only
Drain
Refill Rinse Agent
Delay
Opti Power Regular Delicate Quick Rinse &
Start
MISER Scrub Wash Wash Wash Hold
Hours
Plus
Cycle Countdown Cancel Drain
Cancel Drain
ENGLISH - 19