Sanyo DVP-P1EX Instruction Manual page 37

2
Specify the image to print and the num-
ber of prints.
1 Press the MENU button and move the
menu pointer [g] to [Image Number].
2 Press the [+] or [–] button to select the
image to print.
h When [+] or [–] is pressed, the Index
Navi
Navi to specify the image you wish to
print.
h If you press the [+] and [–] COPIES
buttons at the same time for about 2
seconds, the number of prints speci-
fied in step (3) is applied to all the
images.
3 Press the [+] or [–] COPIES button to
specify the number of prints.
h The number of prints for the currently
selected image (Quantity) and the
total number of prints (Total) are
shown on the LCD monitor.
h A maximum of 19 prints can be speci-
fied.
h You can press the CANCEL button to
cancel the settings.
3
Press the PRINT button.
h The PRINT indicator lights, and printing
begins.
h During printing, the remaining number of prints (Remains) is shown.
NOTE
If the total number of prints indication does not show more than [99]...
i The indication for the total number of prints cannot show more than 99. However, you
can specify more 100 or more prints.
i When the specified total number of prints is 100 or more, the total number of prints
indication appears as [w]. During printing the remaining number of prints indication
also appears as [w]; when the remaining number of prints becomes 99, the correct
number is shown on the display.
You can specify borderless prints, date imprint, and sharpness printing (see page
42).
moves. Use the Index
2-
2
2-
1
Mode
Image
Number
Setting
2-
Index Navi
2-
Number of prints
2-
3
Total number of prints
PRINTING
3
2-
3
2-
2
2-
1
2
3
33
English