Sanyo DVP-P1EX Instruction Manual page 50

TROUBLESHOOTING
Problem or
indication
Printing is not pos-
sible, although the
card is correctly
inserted and the
procedure was cor-
rectly followed.
[w] is shown
instead of the num-
ber of prints indica-
tion on the LCD
monitor.
46
English
Cause
The inserted card has defec-
tive or has unreadable image
data. In this case, the printer
will operate differently depend-
ing on the selected print mode.
All Image print mode
i When defective image data
is read, [v] is
shown on the LCD monitor.
i The defective image is
skipped, and the next
image is read.
i Defective image data is not
printed.
Index print mode
i The defective image is
skipped, and the next
image is read.
i Defective image data is
printed as a "s" mark.
i Images are printed except
for defective image data.
DPOF print mode
i When defective image data
is read, [v] is
shown on the LCD monitor.
i The defective image is
skipped, and the next
image is read.
i Images are printed except
for defective image data.
The card inserted has 1981 or
more images recorded.
There is no recorded image
data on the card.
The card was recorded using a
camera that does not conform
to the DCF standard.
Solution
Not a malfunction. Use a card
that works properly, take the
photos again, and print them.
i Do not record more than
1980 images on one card.
i Insert a card in which image
data has been recorded.
i Insert a card that was
recorded using a camera
that conforms to the DCF
standard.