Palm Rest; Removing The Palm Rest - Dell Latitude C400 Service Manual

Palm Rest : Dell Latitude C400 Service Manual
Back to Contents Page

Palm Rest

Dell™ Latitude™ C400 Service Manual

Removing the Palm Rest

Replacing the Palm Rest
Removing the Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read
following procedure.
1. Remove the
2. Remove the keyboard.
NOTICE: You must remove the display assembly before you remove the palm
rest; the display hinges pass through the back of the palm rest.
3. Remove the
4. Turn the computer over and remove the four M2.5 x 6-mm screws (two screws
to each side of the battery bay).
Palm-Rest Screws on Bottom of Computer
file:///F|/Service%20Manuals/Dell/Latitude/c400/palmrest.htm (1 of 5) [2/28/2004 7:51:03 AM]
"Preparing to Work Inside the
hard drive.
display assembly.
Computer" before performing the