Hitachi C 10FCH Technical Data And Service Manual page 24

1. Remove the four Bolts M8 x 35 [60], Spring Washers M8 [61] and Bolt Washers M8 [62], then remove Fence
(A) [75] and Fence (B) [64].
2. Loosen the Clamp Lever [24] and remove the Machine Screw (W/Washers) M6 x 10 [23]. Turn the Bolt (Left
Hand) M10 [25] and remove it from the Hinge [30].
3. Remove Shaft (D) [27] and remove the Hinge [30] from the Turn Table [50].
4. Remove Table Insert (A) [40] and Table Insert (B) [39] from the Turn Table [50] by removing each fixing screw.
Remove the Side Handle [51] to remove the Spring Plate [69] from the Turn Table [50].
5. Remove the Nylon Nut M8 [46] and remove the Turn Table [50] from the Base Ass'y [78].
--- 20 ---