Hitachi C 10FCH Technical Data And Service Manual page 7

(5) Large table for increased material stability
The turn table is larger than the conventional Model C 10FCB by 30 mm in outside diameter to increase the
material stability.
(6) Powerful 15 amps motor
The Models C 10FCH and C 10FCE are equipped with a 15-ampere motor. The Models C 10FCH and
C 10FCE can cut workpieces as quickly as the Model C 10FCB.
(7) Thumb actuated positive stops for quick and easy miter adjustment
The positive stops are provided to adjust the turn table position for miter cutting more securely than the
conventional Model C 10FCB. These stops can be actuated (fixed or released) with thumb quickly and easily
holding the side handle.
(8) Dust guide to prevent chips from scattering
A dust guide is provided to prevent wood chips from adhering to the saw blade and scattering when cutting the
edge of the workpiece.
Table 1
Outside diameter of turn table (mm)
C 10FCH/FCE
C 10FCB
--- 3 ---
280
250