NEC Single Line User Manual page 6

C
o n f e r e n c e
With an internal call in progress:
➤
Press Hookswitch.
➤
Place second call (internal or outside).
➤
Announce conference.
➤
Press Hookswitch to establish conference.
NOTE 1: Repeat above procedure to add a fourth party.
NOTE 2: No more than 1 outside party can participate in a conference.
NOTE 3: A conference may be placed on Hold by pressing Hookswitch. Replacing the handset will cause
the conference call to ring your telephone.
C
o n f e r e n c e B r i d g e
Start a conference call from an internal extension:
➤
Call a Conference Bridge extension.
➤
When the voice prompt is heard, enter the password and press # .
➤
Start the conference call.
Start a conference call from an an off premise location:
➤
Call a line that is directed to the Conference Bridge.
➤
When the voice prompt is heard, enter the password and press # .
➤
Start the conference call.
Start a conference call from an incoming CO call using an Automated Attendant:
➤
Call an outside line that is answered by an Automated Attendant.
➤
Dial the extension of the Conference Bridge.
➤
When the voice prompt is heard, enter the password and press # .
➤
Start the conference call.
Start a conference call from an incoming CO call using an Attendant:
➤
Call the attendant, and ask to be transferred to a Conference Bridge extension.
➤
Wait until the transfer is complete.
➤
When the voice prompt is heard, enter the password and press # .
➤
Start the conference call.
NOTE: Default passwords: Conference #1= 0001. Conference #2= 0002.
4