Motorola GTX User Manual page 36

36 Call Alert™ Page Operation
(cont.)
Direct Entry of the ID Number to be C all Alert
Paged (Cont.)
4. Press the PTT switch to send the ID number.
5a. If you hear one beep, it indicates that the ID number
has been received by the system, the radio you are
paging is not on the air, and your radio remains in
the Call Alert mode. You can either go back to step 3
and press the PTT switch to send the ID number
again, or press the
the home display.
Note:
• If after six seconds the called radio fails to
acknowledge the alert, a low-pitch alert tone sounds
and the display changes to "no rESP". You may try
this sequence again.
or
5b. If you hear five beeps, it indicates that the ID
number has been received by the system, the radio
you are paging is on the air and has received your
page. The display shows "SCC" momentarily and
the radio automatically returns to the home display.
(Home) button to return to