Leaving A Call Alert Page When Called Party Does Not Answer - Motorola GTX User Manual

50 Trunked Enhanced Private
Conversation™ Call Operation
(900 MHz Only Cont.)
Leaving Call Alert Page When Called Party
Does Not Answer
1. If the party you are private calling does not answer
the call within twenty seconds, the display will show
"no AnS"; the telephone ringing will stop and an
alert tone will sound. At this point you can send a
Call Alert™ page to the party you are calling. This
will leave your radio's ID number with the called
radio so that you can be called back later.
2. Press the PTT switch to send the Call Alert page.
You will hear five beeps to indicate that the number
has been received by the system, the radio you are
paging is on the air and has received your page. The
display shows "SCC" momentarily and the radio
automatically returns to the home display. For more
details see the Call Alert Page Operation on page 33.
3. Press the HOME key and the radio will return to the
home display
Note:
• Once engaged in a private conversation, if the radio
is left idle for more than one minute, a momentary
warning alert will sound every six seconds to remind
you that dispatch calls are not being heard. After
two minutes, a permanent invalid mode tone will be
heard.