Brother HL-4140CN User Manual page 44

Driver and Software
Other Print Options
You can set the following in Printer Function:
 Colour Calibration
 Use Reprint
 Sleep Time
 Improve Print Output
 Skip Blank Page
Colour Calibration
The output density of each colour may vary depending on the temperature and humidity of the environment
the machine is in. This setting helps you to improve colour density by letting the printer driver use the colour
calibration data stored in your machine.
 Use Calibration Data
If you check this box, the printer driver will use the calibration data retrieved from the machine to set colour
matching in the printer driver to ensure consistent print quality.
 Start Colour Calibration...
If you click this button, your machine will start colour calibration and then the printer driver will attempt to
get the calibration data from your machine.
 Get Device Data Automatically
If you check this box, the printer driver will automatically get the colour calibration data from your machine.
Note
If you print by using the Direct Print feature or BR-Script printer driver, you need to perform the calibration
from the control panel. See Colour Calibration on page 83.
Use Reprint
The machine keeps the print job sent to it in memory.
You can reprint the last job without sending the data again from your computer. For more information about
the Reprint function, see Reprinting documents on page 69.
Note
If you want to prevent other people from printing your data using the reprint function, uncheck the
Use Reprint check box.
2
2
2
2
39