Fuel Level Gauge - Yamaha WaveRunner XL1200Ltd Service Manual

– +
ELEC
INDICATION SYSTEM

Fuel level gauge

1. Check:
Fuel level gauge
Not operating → Replace the multi-
function meter.
Checking steps:
Supply DC 12 voltage to the white six-
pin connector (+: red, –: black) with a
battery.
Disconnect the green two-pin connec-
tor (white/blue and black leads).
Connect the white/blue and black ter-
minals with a jumper lead 1.
Connect the green and red terminals
with a jumper lead 2.
NOTE:
If the jumper lead is installed for more
than 30 seconds, the display will auto-
matically turn off.
Check the fuel level segments is full
indicated.
Remove the jumper lead from the
green two-pin connector.
Disconnect the jumper lead 2 and
then connect it to green and red ter-
minal again.
Make sure the fuel low level segment
3, fuel level warning indicator 4
and "
the "WARNING" lamp 6 operates
properly, and the buzzer sounds inter-
mittently.
7-39
" message 5 blinks, and
E