Brake Hoses And Pipes Inspection; Brake Fluid Change - Suzuki Swift User Manual

ITEM 5-2

Brake Hoses and Pipes Inspection

Perform this inspection where there is enough light and use a mirror
as necessary.
D Check brake hoses and pipes for proper hook-up, leaks, cracks,
chafing, wear, corrosion, bends, twists and other damage.
Replace any of these parts as necessary.
D Check all clamps for tightness and connections for leakage.
D Check that hoses and pipes are clear of sharp edges, moving
parts.
CAUTION:
After replacing any brake pipe or hose, be sure to carry out
air purge operation.
ITEM 5-3

Brake Fluid Change

CAUTION:
Since brake system of this vehicle is factory-filled with
brake fluid indicated on reservoir cap, do not use or mix dif-
ferent type of fluid when refilling; otherwise serious dam-
age will occur.
Do not use old or used brake fluid, or any fluid from a un-
sealed container.
Change brake fluid as follows.
Drain existing fluid from brake system completely, fill system with
specified fluid and carry out air purge operation.
For air purging procedure, refer to SECTION 5.
MAINTENANCE AND LUBRICATION 0B-13