Beko EV 7100 + User Manual page 13

C
INFORMATIONS
You can remove the filter cover by slightly pushing downwards with
a thin plastic tipped tool, through the gap above the filter cover. Do
not use metal tipped tools to remove the cover.
Follow the steps below to discharge the water.
Place a large container in front of the filter to catch water
from the filter. Loosen pump filter (anticlockwise) until water
starts to flow. Fill the flowing water into the container you
have placed in front of the filter. Always keep a piece of cloth
handy to absorb any spilled water. When the water inside the
machine is finished, take out the filter completely by turning it.
Clean any residues inside the filter as well as fibers, if any,
around the pump impeller region. Install the filter.
Seat the tabs in the lower part into their places first, and then
press the upper part to close.
13 / 68 EN
Washing Machine / User's Manual