Installation Of The Hybrid Ip-Pbx Pc Programming Software; Installing And Starting The Kx-Tda50 Maintenance Console - Panasonic KX-TDA50 Installation Manual

3.3 Installation of the Hybrid IP-PBX PC
Programming Software
3.3.1 Installing and Starting the KX-TDA50 Maintenance
Console
System Requirements
Operating System
• Microsoft
Hardware
• CPU: Intel
• RAM: at least 64 megabytes (MB) of free RAM (128 MB recommended)
• HDD: at least 100 MB of hard disc space
Installing the KX-TDA50 Maintenance Console
To install or uninstall the software into Windows 2000 Professional or Windows XP
Professional, the user must be grouped either of "Administrators" or "Power Users".
Notes
• To install or uninstall the software on a PC running Windows 2000 Professional or
Windows XP Professional, you must be logged in as a user which is in either the
"Administrators" or "Power Users" group.
• When the Hybrid IP-PBX is first connected to the PC via USB, a wizard should appear
and ask you to select the appropriate USB driver. Browse for and select the KX-TDA
USB driver, which is copied to the local drive during installation.

3.3 Installation of the Hybrid IP-PBX PC Programming Software

® ®
Windows 98 SE, Windows Me, Windows 2000, or Windows XP
® Pentium ® 133 MHz or better microprocessor
1.
Copy the KX-TDA50 Maintenance Console
setup file to a local drive on the PC. (Its icon
is shown here, on the left.)
2.
Double-click the setup file to run the
installer.
3.
Follow the on-screen instructions provided
by the installation wizard.
Installation Manual 127