Panasonic KX-TDA50 Installation Manual page 134

3.3 Installation of the Hybrid IP-PBX PC Programming Software
File Transfer PC to PBX (SD Card)
File Transfer PBX (SD Card) to PC
SD Card File View and Load
Message File Transfer PC to PBX
Message File Transfer PBX to PC
Error Log
CS Information
PS Information
System Reset
Reset by the Command
Flash ROM ID Information
134 Installation Manual
The program files in the PC are transferred to SD
Memory Card of the Hybrid IP-PBX. Program
files in the SD Memory Card is overwritten in this
process.
The program files in the SD Memory Card are
transferred to the PC.
The name, date, time, and size of program files
in the SD Memory Card are viewed, then these
files are transferred to each CS connected to the
Hybrid IP-PBX.
The message files for Outgoing Messages in the
PC are transferred to all MSG cards. Available
only when at least 1 MSG card is installed.
The message files for Outgoing Messages in the
MSG cards are transferred to the PC. Available
only when at least 1 MSG card is installed.
The error log is displayed (for details, refer to
"4.1.5 Troubleshooting by Error Log").
Displays the internal information of the CS.
Displays the registration information of the PS.
Resets the connected Hybrid IP-PBX. (It is the
same as pushing the Reset Button with the
System Initialize Switch in the "NORMAL"
position.) After using this command, you have to
restart the KX-TDA50 Maintenance Console and
connect to the Hybrid IP-PBX again.
Displays the ID information of the Flash ROM.