Specifications; Attachments/Accessories - Toro Greensmaster 04052 Operator's Manual

Reel Drive Lever
The reel drive lever (Figure 10) is located on the
right front corner of the machine. The lever has two
positions: Engage and Disengage. Pull up on the lever
to engage the reel or push it down to disengage the reel.
Figure 10
1. Reel drive lever
Choke Lever
The choke lever (Figure 11) is located on left front of
the engine. The lever has two positions: Run and Choke.
Move the lever to the Choke position when starting
a cold engine. After engine starts move lever to Run
position.
Figure 11
1. Choke lever
Fuel Shut-Off Valve
The fuel shut-off valve (Figure 11) is located on left
front of engine. The valve has two positions: Closed
and Open. Move the lever to the closed position when
storing or transporting machine. Open the valve before
starting the engine.
Recoil Starter
Pull recoil starter handle (Figure 12) to start engine.
2. Fuel shut-off valve
1. Recoil starter
Kickstand
The kickstand (Figure 12) is mounted to the rear of
machine and is used to raise the rear of machine for
installation or removal of the transport wheels.

Specifications

Model 04052
Width 36 inches (91 cm)
Height 41–1/2 inches (105
cm)
Length with basket 59 inches (150 cm)
Dry weight (with 208 lb (94 kg.)
basket and Wiehle
roller; without
wheels or grooming
reel)
Width of cut 21 inches (53 cm)
Height of cut 0.063 to 1.25
inches (1.6 mm
to 31.8 mm)
Clip 0.17 inch (34.2 mm) 0.23 inch (5.8 mm)
Engine speed Low idle –1600
±100 RPM, High
idle – 3600 ±100
RPM

Attachments/Accessories

A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
14
Figure 12
2. Kick stand
Model 04060
41 inches (104 cm)
41-1/2 inches
(105.4 cm)
59 inches (150 cm)
229 lb (104 kg)
26 inches (66 cm)
0.063 to 1.25
inches (1.6 mm
to 31.8 mm)
Low idle –1600
±100 RPM, High
idle – 3600 ±100
RPM