Installing The Oven - Miele H 5740 BP Operating And Installation Instructions

,
The appliance must be built in
before it can be used. Otherwise it
poses an electric shock hazard.
To ensure adequate ventilation to
the oven once installed
– do not fit a rear panel to the
housing unit.
– make sure that the shelf on
which the appliance is placed
does not touch the wall.
– do not fit insulation material
inside the housing unit.
When installing the appliance, do
not lift it up by the door handle as
this can damage the door.

Installing the oven

,
Turn off the mains electricity
supply to the isolator.
^ Connect the mains cable from the
oven to the isolator.
It is a good idea to remove the door
before installation. This will make the
oven lighter and the door handle can't
be used inadvertently to carry the oven.
^ Push the appliance into the oven
housing unit and align it.
^ Open the door if it has not been
removed.
^ Using two screws, secure the oven to
the side walls of the housing unit
through the holes in the oven trim.
^ Refit the door if it has been taken off
for installation (see "Cleaning and
care").
71