Make Connections - JVC GR-DVM90 Instructions Manual

Red to
AUDIO
R OUT
White to
To JLIP
AUDIO
(EDIT)
L OUT
Core filter
Editing
cable
(provided)
White to
AUDIO L IN
Red to
AUDIO R
IN
To Remote
PAUSE or
R.A.EDIT
To PAUSE IN
DISPLAY
* Connect when an S-Video cable is not used.
ATTENTION FOR EDITING CABLE
• Be careful not to mistake it for the JLIP
cable ( pg. 6).
• Make sure you connect the end with the
core filter to the camcorder.

MAKE CONNECTIONS

Also refer to pg. 58 and 59.
1
To
S-VIDEO
Yellow to
VIDEO
OUT*
2
Core filter
S-Video
cable
3
(optional)
Audio/
Video cable
NOTES:
[RCA plug to
Before Random Assemble Editing, make sure the
RCA plug]
(optional) indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
Yellow to
To choose whether or not the following displays appear
VIDEO
on the connected TV . . .
IN*
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
To
S-VIDEO
IN
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
VCR
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "SIMPLE" in the
TV
The S-Video cable and Audio/Video cable (RCA plug to
RCA plug) are optional. Be sure to use the following:
• S-Video cable: YTU94146A
• Audio/Video cable (RCA plug to RCA plug):
Consult the JVC Service Center described on the sheet
included in the package for details on their availability.
Make sure to connect the ends with a core filter to the
camcorder. The core filter reduces interference.
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
You can use the AV OUT connector on the camcorder
for connection.
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a remote
pause connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control's PAUSE IN connector.
Insert a recorded tape into the camcorder and set the
POWER Switch to "
Lock Button located on the switch.
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instructions).
Menu Screen ( pg. 43).
Screen ( pg. 43).
Menu Screen ( pg. 43). Or, press DISPLAY on the
remote control.
YTU94147A
CONTINUED ON NEXT PAGE
71
EN
" while pressing down the