NEC Univerge SV8100 System Maintenance Manual page 50

Issue 1.0
3 - 10
Date
Enter Function
date Displays the current date /
time and general system
information including
CD-CP00-US software
version and PAL type.
Status
Enter Function
status List the status
commands
available.
To display the status of one port:
status llnn
Where ll is the logical port type and nn is the port number in hexadecimal.
(example – to display the status of key telephone port 10 = status 040a)
To display the status of a range of ports:
status sta/trk nn nn
Where ll is the logical port type and nn is the port number in hexadecimal.
(example – to display the status of extension ports 01 through to 16 = status sta 01
0f)
DIM Output
Current date/time : 1-1-2002 (TUE) 0:17:41
System build date : Jul 16 2004 16:56:25
[Target is North America (Electra)]
Main software version : 00.1u
PAL TYPE : V-PALB
FPGA version : 001FH
CCPU-DSP version : 7628H
DSPDBU version : 0000H
MAC1 Address : 00-60-B9-01-
MAC2 Address : 00-60-B9-01-FD-3B
C/C++ library heap 112945388Bytes free
[Total=118132660Bytes,
Used=5187272Bytes]
Maximum intervals):
Drivers : 0.11sec.
H levels : 0.11sec.
B levels : 0.16sec.
Mail tasks : 1.01sec.
Idle tasks : 5.45sec.
DIM Output
STATUS logical_port(HEX)
STATUS [STA|TRK |VRS]
<start_serial_port(HEX)><end_serial_port(HEX)>
STATUS SET <logical_port(HEX)> <new_status
(HEX)
UNIVERGE SV8100