Replacing The System Board - Dell Latitude X200 Service Manual

System Board: Dell Latitude X200 Service Manual
15. Remove the modem daughter
system board.

Replacing the System Board

1. Install the modem daughter card
in the replacement system board.
2. Place the system board in the bottom case.
NOTE: Route cables so that they will not be crimped or pinched when the
complete assembly is put back together.
3. Reconnect the status light (LED) cable to the system board ZIF connector.
4. Reinstall the four M2 x 4-mm screws that secure the system board to the
bottom case.
NOTE: After replacing the system board, enter the computer service tag
sequence into the BIOS of the replacement system board.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/x200/sysboard.htm (3 of 3) [2/28/2004 8:24:04 AM]
card, and set it aside to install in the replacement
that you removed from the old system board