Fujitsu ETERNUS Manual page 20

Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server
> 7.2 Setting Up the Server
3
4
5
P3AM-4182-03ENZ0 Server Connection Guide (iSCSI) for Oracle Solaris
Enable CHAP authentication.
Enable CHAP authentication on the Initiator.
# iscsiadm modify initiator-node --authentication CHAP
Check that CHAP is enabled on the Initiator.
Use the "initiator-node" option.
# iscsiadm list initiator-node
Initiator node name: iqn.1986-03.com.sun:01:00144f565a49.47677520
Initiator node alias: -
Login Parameters (Default/Configured):
Header Digest: NONE/-
Data Digest: NONE/-
Authentication Type: CHAP
CHAP Name: initiator
RADIUS Server: NONE
RADIUS access: unknown
Configured Sessions: 1
Check that CHAP is enabled on the Target.
Use the "target-param" option.
# iscsiadm list target-param -v
Target: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm1
Alias: dxlcm1port1
Bi-directional Authentication: disabled
Authentication Type: CHAP
CHAP Name: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm1
:
:
Target: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0
Alias: dxlcm0port1
Bi-directional Authentication: disabled
Authentication Type: CHAP
CHAP Name: iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0
If CHAP is disabled, use the "iscsiadm" command to enable it.
# iscsiadm modify target-param -a CHAP Target_name
Example:
To set "iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0" and "iqn.2000-
09.com.fujitsu:storage-system.e2000:00001001-cm1" as the target CHAP names
#iscsiadm modify target-param -a CHAP iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm0
#iscsiadm modify target-param -a CHAP iqn.2000-09.com.fujitsu:storage-system.e2000:00001001-cm1
20
End of procedure
Copyright 2010 FUJITSU LIMITED